Jiangsu Kunyuan Rubber & Plastic Technology Co.,Ltd
Jiangsu Kunyuan Rubber & Plastic Technology Co.,Ltd
Add to Cart
Black NBR O-rings for hydraulic fittings
The hydraulic pipe joint is a component in the hydraulic system that connects the high-pressure oil pipes. Due to the very high pressure in the hydraulic system, there are higher requirements for the strength and compression permanent realization rate with the O-ring material.
| Advantages |
Good resistance to oil, water, solvent and high-pressure oil. • Low permanent compression set value, good abrasion resistance and elongation. • Used for fuel tanks, lubricant oil tanks, and to make rubber parts used in fluid media such as petroleum hydraulic oil, gasoline, water, silicone grease, silicone oil, diester lubricating oil, and glycol hydraulic oil. It is the most widely used and cost-effective rubber seal in the market. |
| Disadvantages | Not suitable for use in polar solvents such as ketones, nitrohydrocarbons, MEK and chloroform. It has poor weather resistance and needs to be protected from damage of ozone and ultraviolet rays. |
| operating temperature | -20 °C to 140 °C. |
| Main Application areas | Often used in the production of fuel tank, lubricating oil tank and in the petroleum system hydraulic oil, gasoline, silicone oil, diester lubricating oil, ethylene glycol system hydraulic oil and other fluid medium use |